What is the relationship between solar energy and wind energy?

Answer:

negative

Explanation:

positive charges attract negative charges and vice versa. and are possible to nullify

Answer:

6. Speed = 76.8 m/s

7. Frequency = 1372 Hz

Explanation:

Given the following data;

6. Frequency = 384 Hz

Wavelength = 20 cm to meters = 20/100 = 0.2 m

To find the speed of sound;

Speed = wavelength * frequency

Speed = 0.2 * 384

Speed = 76.8 m/s

7. Wavelength = 25 cm to meters = 25/100 = 0.25 m

Speed = 343 m/s

To find the frequency of the turning fork;

Frequency = speed/wavelength

Frequency = 343/0.25

Frequency = 1372 Hz

The moon that experiences the greatest gravitational force of attraction from Jupiter is Io, which is the innermost of Jupiter's four largest moons (also known as the Galilean moons).

Io is the most massive of the Galilean moons, and it is also the closest to Jupiter, which means that it experiences the strongest gravitational force of attraction from the planet. In fact, the strong gravitational pull of Jupiter on Io is so great that it causes Io to experience significant tidal forces, which have caused its surface to become heavily fractured and geologically active.

It's worth noting that while Io experiences the strongest gravitational force of attraction from Jupiter, the other Galilean moons (Europa, Ganymede, and Callisto) also experience significant gravitational forces due to their large masses and close proximity to Jupiter.

To know more about Gravity

https://brainly.com/question/14874038

#SPJ4

Answer:the answer is A, lo

Explanation:

A big machine is composed of several moving and stationary parts. Some of these parts are in a state of constant motion hence they periodically rub against each other.

To learn more about mechanical advantage refer to:

https://brainly.com/question/25984831

#SPJ1

Speed = (distance covered) / (time to cover the distance)

Speed = (400 ft) / (25 seconds)

Speed = 16 ft/sec

That's the car's speed.

We don't have enough information to state its velocity.

Thermal energy refers to the energy contained within a system that is responsible for its temperature. Heat deals with the flow of thermal energy. Temperature is the physical manifestation of thermal energy, and deals with whether it feels cold or hot. 

Answer:

Neutral

Explanation:

The buoyant force balances the force of gravity when the average density of an object is equal to the density of the fluid in which it is immersed, resulting in the object sinking (if its density is greater than the density of the fluid) or rising (if it is less). Neutral buoyancy occurs when the average density of an object equals the density of the fluid in which it is immersed. There is no sinking or rising for an object with neutral buoyancy.

An acoustic signal or sound pulse is sent into the water by active sonar transducers. The sound pulse will bounce off an item if one is in the way of the sound pulse, sending a "echo" back to the sonar transducer.

SONAR is most useful underwater, although it also functions in the open air. The reason for this is that sound travels farther in water.

Sonar devices use sound waves to penetrate the ocean and record the sound waves that are reflected back to display items below the surface. This is known as active sonar, which is a type of echolocation similar to that employed by bats. Similar technology exists in radar, but radio waves are used in it.

To know more about sonar visit :-

https://brainly.com/question/4955683

#SPJ4

Answer:

[tex]Vg=200mile/hr[/tex]

[tex]\theta=153 \textdegree[/tex]

Explanation:

From the question we are told that:

Plane airspeed [tex]v_p=190mil/h[/tex]

Plane direction [tex]\angle=150 \textdegree[/tex]

Wind current speed [tex]V_w=30mil/h[/tex]

Wind direction [tex]\angle=150 \textdegree[/tex]

Generally the vector form of the forces is mathematically given by

For plane

[tex]\angle Q_p=90-150 \textdegree[/tex]

[tex]V_p=170(cos60 \textdegree ,sin60 \textdegree)[/tex]

[tex]V_p=(85,-147.224)[/tex]

For wind

[tex]\angle Q_w=90-170 \textdegree[/tex]

[tex]V_w=30(cos-80 \textdegree ,sin-80 \textdegree)[/tex]

[tex]V_w=(5.2,-29.54)[/tex]

Generally the equation for resultant force is mathematically given by

[tex]v_r=V_a+V_w[/tex]

[tex]v_r=(85,-147.224)+(5.2,-29.54)[/tex]

[tex]v_r=(90.21,-176.76)[/tex]

[tex]v_r=198.45\angle -63[/tex]

Therefore ground speed

[tex]V_g=198.5miles/hr[/tex]

[tex]Vg=200mile/hr[/tex]

Direction

[tex]\theta=(90+63)=153 \textdegree[/tex]

[tex]\theta=153 \textdegree[/tex]

Nuclear fusion reactions begin in the main sequence stage of a star's life.

During the main sequence stage, a star is in hydrostatic equilibrium, meaning that the outward pressure of the hot, dense gas at its core is balanced by the inward gravitational force. This balance allows the star to maintain a stable size and luminosity.

At the core of a main sequence star, the temperature and pressure are high enough to initiate nuclear fusion reactions, in which hydrogen nuclei combine to form heavier helium nuclei. These reactions release a large amount of energy in the form of light and heat, which helps to maintain the high temperature and pressure at the core and keep the star in hydrostatic equilibrium.

Learn more about Nuclear Fusion here:

https://brainly.com/question/17870368

#SPJ4

Answer:

c

Explanation:

The length of the string is 75 cm.

Centripetal acceleration is a characteristic of an object's motion along a circular path. Centripetal acceleration applies to any item travelling in a circle with an acceleration vector pointing in the direction of the circle's center.

Given that:  The centripetal acceleration of the ball is: a = 24.7 m/s^2.

constant speed of the ball is: v = 4.3m/s.

Let  the length of the string is l.

We know that:   The centripetal acceleration: a = v^2/l

l = v^2/a

= (4.3)^2/24.7

= 0.75 m.

Hence,  the length of the string is 0.75 m or 75 cm.

Learn centripetal acceleration here:

https://brainly.com/question/14465119

#SPJ1

Important Formulas:

[tex]w=Fd[/tex]

[tex]F=ma[/tex]

work(measured in joules) = force(measured in newtons) * distance(measured in meters)

force(measured in newtons) = mass(measured in kg) * acceleration(measured in m/s^2)

__________________________________________________________

Given:

[tex]m=150kg[/tex]

[tex]d=2m[/tex]

[tex]a=9.8m/s^2[/tex] (acceleration due to gravity)

[tex]w=?[/tex]

__________________________________________________________

Finding force:

[tex]F=ma[/tex]

[tex]F=150\times9.8[/tex]

[tex]F=1470N[/tex]

__________________________________________________________

Finding work:

[tex]w=Fd[/tex]

[tex]w=1470\times2[/tex]

[tex]w=2940J[/tex]

__________________________________________________________

[tex]\fbox{Option B}[/tex]

Answer:

36.m/s/s

Explanation:

Yes, the weight of the suspension clamps is omitted from the calculation as long as each side of the support is the same.

Suspension clamps are mainly used for overhead power lines or substations. It can hang wire, lightning protection wire on insulator string, or lightning protection cable on the tower by connecting fittings. Suspension clamps are mainly made of malleable iron and aluminum alloy.

Given the same number of clamps on both sides of the support, when we calculate the torque, the weight of the clamps will disappear from each side.

Like there are 2 clamps on each side so the torque due to the clamps are going to be

                  τ = r x F = 2 * W * d - 2 * W * d          

So that the weight of the clamps can be omitted as in the final calculation of the torque as each clamp will cancel out. Provided that the position of the clamps on both sides of the support is the same (i.e., distance d from the support)

Learn more about the suspension clamps at https://brainly.com/question/17156840

#SPJ4

The kinetic energy of the ball when it has a mass of 0.7 kg is 14000J.

When the speed is 180 m/s its K.E. changes to 11340 J.

Calculate the kinetic energy of the following options?

A. Kinetic energy E = 1/2 [tex]mv^{2}[/tex]

mass (m) = 0.7 kg

speed (v) = 200 m/s

K.E = 1/2 (0.7) (200)^2

K.E = 1/2 (28000)

K.E = 14,000J

K.E = 14 x 10^3 J

The kinetic energy of the ball has a mass of 0.7 kg is 14 x [tex]10^{3}[/tex] J

B. The kinetic energy is directly proportional to the square of the speed or velocity. When the speed increases its kinetic energy also increases. When the speed decreases also its kinetic energy is decreases.

K.E. = 1/2 [tex]mv^{2}[/tex]

K.E. = 1/2 (0.7) (180)^2

K.E. = 11,340 J

So, the speed of the kinetic energy is decreased, the value of K.E. is also decreased.

To learn more about kinetic energy refer to:

https://brainly.com/question/25959744

#SPJ1

Answer:

because the lumps are just baking soda covered with whatever watery substance you used.

Explanation:

so pretty much inside the lumps is just a bunch of baking soda

Answer:

Similarly, the law of conservation of energy states that the amount of energy is neither created nor destroyed. For example, when you roll a toy car down a ramp and it hits a wall, the energy is transferred from kinetic energy to potential energy.

Explanation: To be more clear, your answer would be A

Correct option is D, the stopping potential when metal with work of 0.6 eV is illuminated with the light of 2.6 ev is 1.4 V

The minimal negative voltage that must be provided to the anode to halt the photocurrent is known as stopping potential. When expressed in electron volts, the maximal kinetic energy of the electrons is equal to the stopping voltage. The stopping potential (V0) for the specified frequency of incident radiation in an experimental setup for the photoelectric effect is the value of the negative potential of the collector plate or anode at which the photoelectric current will fall to zero.

Given: E = 2 eV and 0 = 0.6 eV

To locate Potential for stopping (Vo) Formula: Vo = (E - Φ₀)/ e

Calculation:

Vo= 2 × 1.6 × 10^-19 – 0.6 × 1.6 × 10^-1 / 1.6 × 10-19

= 2 -0.6

= 1.4 V

1.4 V is the stopping potential.

To learn more about stopping potential from given link

https://brainly.com/question/13839503

#SPJ4

Answer:

Running up a flight of stairs is different than walking because it requires a different type of muscle activity. When walking, the muscles in your legs move in a more controlled and rhythmic manner, allowing you to maintain a steady pace and avoid stumbling. In contrast, running up stairs requires your muscles to work in a more explosive and powerful manner, generating bursts of force to push you upward and forward. This type of muscle activity is much more intense and demanding, and it requires more energy and effort than walking.

Additionally, running up stairs also requires you to overcome the force of gravity to a greater extent than walking. When you walk up stairs, you are able to use the stairs to support your weight and to assist you in moving upward. When running, however, you are moving too quickly to use the stairs in this way, and you must rely on your own muscle power to lift your body upward. This additional force of gravity makes running up stairs more challenging and demanding than walking.

E = hv is the energy equation. In the formula, E stands for energy, h for Planck's constant (6.626 x 10 -34 J s), and v for frequency. Since frequency rises as energy falls, frequency and energy are related directly in the energy equation.

The frequency of the radiation directly affects how much energy each quantum contains. The amount of energy carried is inversely proportional to wavelength since frequency and wavelength have an inverse relationship.

The equation E=hv, where h is Planck's constant, describes the relationship between a photon's energy E and frequency v.

In essence, energy is inversely proportional to wavelength but directly proportional to radiation frequency. Accordingly, energy rises with a rise in frequency or a fall in wavelength, and falls with a fall in frequency or a rise in wavelength.

To learn more about energy frequency relation from given link

https://brainly.com/question/13396102

#SPJ4

18902.4 J kinetic energy just before it strikes the ground.

The energy an item has as a result of motion is known as kinetic energy. A force must be applied to an item in order to accelerate it. We must put forth effort in order to apply a force. After the job is finished, energy is transferred to the item, which then moves at a new, constant speed.

Given that,

mass (m) = 18.3 kg

height (h) = 105.4 m

Thus, Potential energy (P.E) = mgh

or, P.E = (18.3) ×(9.8) ×(105.4)

or, P.E = 18902.4 J

Kinetic energy (K.E) = Potential energy (P.E)

or, Kinetic energy (K.E) = 18902.4 J

Thus, 18902.4 J kinetic energy needed just before it strikes the ground.

To know more about kinetic energy refer to:

https://brainly.com/question/8101588

#SPJ1

The answer is (A.) The sail is pushing the wind back and slowing down the air. The wind is pushing the sail and the sail pushes the wind back and slows the air down.

As the boat is sailing, the wind will be faster than the boat. This fast wind is obstructed by the sail. That is, the fast wind gets slowed down by the sail because the sail pushes the wind backwards which slows down the wind. This will make the wind push the boat forward thereby accelerating the boat.

Learn more about the forces acting on a boat here:

https://brainly.com/question/21186114

Because the wall is not moving, the work you are performing on it is coming closer by exerting 400 n of force.

Despite the man's forceful efforts, the wall does not budge. Work completed equals force applied times displacement, and since the wall's displacement is 0, work completed is also zero.

When an object experiences force and is moved from its starting location, this is referred to as doing work. The Joule is the SI unit of work. A joule is defined as a newton of force applied to an object that results in a displacement of one meter. This signifies that when force is exerted to a wall, nothing is accomplished.

To know more about Work done visit:-

https://brainly.com/question/13662169

#SPJ4

Answer: Potential energy is at almost 0%, and kinetic energy is at almost 100%

Explanation: took the exam

The roller coaster will lost its potential energy when its starts to excite the vertical loop and its kinetic energy will be maximum. Hence, option D is correct.

Kinetic energy of a body is generated by its motion. Kinetic energy is proportional to the mass and square of the velocity of the object. Thus, as the speed of the object increase, kinetic energy increases.

Potential energy of a body is generated by virtue of its position. When a moving body slows down to stop, it gains potential energy and its kinetic energy starts decreasing.

When the roller coaster excites the vertical loop of the closed path, it loses its potential energy and  kinetic energy increases to maximum since its moving the down loop with greater velocity. Thus, option D is correct.

To find more on kinetic energy, refer here:

https://brainly.com/question/26472013

#SPJ2

The response to the questions are given below:

1a. The condition for the equilibrium of a rigid body acted upon by parallel forces is that the vector sum of all the forces acting on the body must be equal to zero, and the vector sum of all the torques (moments) acting on the body must also be equal to zero.

1bi. An experiment to determine the mass of a meter rule using the principles of moments could involve suspending the meter rule from a pivot point using a string or wire, and then applying known weights to the ends of the meter rule.

1bii. Two precautions that should be taken to ensure accurate results in this experiment would be to ensure that the pivot point is perfectly level and that the weights applied to the ends of the meter rule are applied at exactly the same distance from the pivot point.

C. A couple in physics is a pair of forces that act on a body in such a way that they produce a turning effect, or torque, about a fixed point. A couple consists of two equal and opposite forces that are applied to the body at different points.

When a rigid body's linear momentum or rotational momentum are not changing at any given time, it is said to be in mechanical equilibrium. The body is in a state of mechanical equilibrium when there is no linear or angular acceleration.

When a rigid body's linear and angular acceleration are both zero with respect to an inertial frame of reference, we say that it is in equilibrium. A body in equilibrium can therefore move, but in that case, its linear and angular velocities must remain constant.

Therefore, In essence, there should not be any acceleration for an object to be in equilibrium (linear or angular). Therefore, the item must have zero net force and zero net torque.

Learn more about equilibrium  from

https://brainly.com/question/517289

#SPJ1

A gas dissolves in a liquid most rapidly when under High pressure.

An example of a high pressure boiler is one that produces energy in thermal power plants that runs at 80 bars or more. They produce electricity by turning water into steam through thermal energy using water-filled tubes in a metal tank or enclosure, which is then utilized to power machinery. There is a higher likelihood of leaks occurring in the system if the boiler pressure is too high. The system won't function as well if the boiler pressure is too low, though. For your system to effectively heat your home, it is crucial to maintain the proper boiler pressure.

Learn more about  High pressure here:

https://brainly.com/question/12473337

#SPJ4

In comparison to solar panels, which are just 18% to 22% efficient, wind turbines typically capture 60% of the energy that travels through them. It follows that it is undisputed that a single house wind turbine can generate more electricity than a number of solar panels.

Through photovoltaic (PV) panels or mirrors that concentrate solar radiation, solar technologies turn sunlight into electrical energy. Batteries or thermal storage devices can be used to store this energy or to generate power.

On the top of a solar panel, a thin layer of silicon is hit by photons, or light particles, which dislodge electrons from silicon atoms. The wiring in solar panels is able to capture the electric current that this PV charge generates.

To know more about electricity wind or solar visit :-

https://brainly.com/question/889163

#SPJ4

The shuttlecock began 7 meters above the ground, and fell through a vacuum. The equation a = v/t shows acceleration (a), which is the change in velocity (v) over the change in time (t).

time chart A velocity vs. time graph can be used to determine position and to calculate velocity. We are aware that v = d/t. Rearranging the equation with a little mathematics reveals that d = v t.

△a = △v/△t, For an item travelling at a constant rate of acceleration, the rate of acceleration remains constant over all time intervals. As a result, the acceleration-time graph has a slope of zero and is parallel to the time axis.

Learn more about velocity here;

https://brainly.com/question/18084516

#SPJ1