The way to prepare a comprehensive requirements document containing both textual and model-based requirements documentation is given below
How to elicit requirements from stakeholders?The general guidance on how to elicit requirements from stakeholders.
One approach is to use a variety of elicitation techniques, such as interviews, focus groups, workshops, and surveys, to gather information from stakeholders about their needs and expectations for the project. These techniques can be used to gather both textual and model-based requirements, including functional requirements (what the system should do), non-functional requirements (how the system should behave), and constraints (limitations on the system).It is important to involve all relevant stakeholders in the elicitation process to ensure that all of their needs and concerns are taken into account. It is also important to be clear and specific in your questions and to listen carefully to the responses in order to accurately capture the requirements.Therefore, Once the requirements have been elicited, it is important to document them clearly and accurately in a comprehensive requirements document. This document should include both textual and model-based requirements, as well as any relevant diagrams or models that help to communicate the requirements to the development team and other stakeholders.
Learn more about documentation from
https://brainly.com/question/25534066
#SPJ1
Which of the following types of networking hardware is installed in a computer or server to connect to an ethernet switch using a Cat 6 cable?
A router or switch is installed on your computer or server and connected to an Ethernet switch using Cat 6 cables. An Ethernet cable physically connects AP to router or switch on wired LAN. This allows AP to access the Internet and other networks.
What is Cat6 cable used for?Cat6 cables use twisted pair cables by default to minimize crosstalk and reduce noise from electrical interference. There are two types of twisted pair cables: shielded twisted pair (STP) and unshielded twisted pair (UTP).
Cat 6 cables are mainly used for computer networks reaching data transfer rates (DTR) of Gb, 1000 Mbit/s or 1 Gbit/s and above. Features include: It consists of four pairs of copper wires, all of which are used for data transmission.
Is CAT6 used for Ethernet?CAT6 is a standardized twisted pair cable for Ethernet that is backward compatible with CAT5/5e and CAT3 cabling standards. Similar to CAT5e, CAT6 cable supports Gigabit Ethernet segments up to 100m, but can also be used in 10 Gigabit networks over limited distances.
To learn more about network cable visit:
https://brainly.com/question/21808066
#SPJ4
Question 8 (2.5 points)
How would you type a capital Y?
Hold down the shift key with the left pinky and type Y with the right thumb
Hold down the shift key with the right pinky and type Y with the right middle
finger
Hold down the shift key with the left pinky and type Y with the right index finge
Hold down the shift key with the right pinky and type Y with the right index
finger
ng mga man
Answer:
Hold down the shift key with the right pinky and type Y with the right index
finger
Explanation:
The explanation for this Answer is that the letter "Y" is located just in the middle of the numbers "5 and 6" which is very close to your right index finger so you may use your right pinky finger to hold the Shift key and then press the "y" key after pressing like this you will get your expected answer. Thank You!
The letter "Y" is located just in the middle of the numbers "5 and 6" which is very close to your right index finger so you may use your right pinky finger to hold the Shift key. Other part of question is discussed below.
What are the most common layout of keys?The most common layout of keys on the keyboard is the querty keyboard. A computer keyboard is an input device that is used to key in letters, numbers, and other symbols.
The computer user uses the key board to as a mode of communication between him or her and the commuter in order to produce the expected results as the output.
Qwerty keyboard has been known as the most common layout of the keys on the keyboard. It has the standard computer keyboard and it refers to the first six letters on the upper row of the keyboard.
The Pinky Finger is the little or the small finger which is below or next to the small finger. On the computer keyboard the pinky finger types P, semicolon (;), colon (:), slash (/), question mark (?), enter, backspace and shift.
Therefore, The letter "Y" is located just in the middle of the numbers "5 and 6" which is very close to your right index finger so you may use your right pinky finger to hold the Shift key.
Learn more about keyboard on:
https://brainly.com/question/24921064
#SPJ2
which of the following govern how the network is configured and operated as well as how people are expected to behave on the network?
Answer:
There are several factors that can govern how a network is configured and operated, as well as how people are expected to behave on the network. Some examples of these factors include:
Network policies: These are guidelines and rules that dictate how the network should be configured and used. Network policies may cover topics such as security, access control, usage guidelines, and acceptable use policies.
Network architecture: The design and layout of the network, including the types of devices and technologies used, can have an impact on how the network is configured and operated.
Network protocols: Protocols are standards and rules that govern how devices on the network communicate with each other. Different protocols may be used for different types of communication, such as data transfer, routing, and security.
Industry standards: Industry standards are guidelines and best practices that are widely followed within a particular industry. These standards may dictate how networks should be configured and operated within that industry.
Legal and regulatory requirements: In some cases, networks may be subject to legal and regulatory requirements that dictate how they should be configured and operated. These requirements may vary depending on the location and industry of the network.
Design a function that accepts a list as an argument and returns the largest value in the list. The function should use recursion to find the largest item.
Create a list with numbers: 10, 20, 30, 40, 50, 60, 70, 80, 90.
Create a recursive function that takes a list as an argument. Pass created list to the recursive function.
Display the largest item.
Upload the .py file.
Using the knowledge of computational language in python it is possible to write a code that Design a function that accepts a list as an argument and returns the largest value in the list.
Writting the function:def Largest(list):
if len(list) == 1:
return list[0]
else:
maxelement = Largest(list[1:])
return maxelement if maxelement > list[0] else list[0]
def main():
list=[10, 20, 30, 40, 50, 60,70, 80, 90]
print("Largest value is ",Largest(list))
if __name__ == '__main__':
main()
def Max(list):
if len(list) <= 1:
else:
return list[0]
else:
m = Max(list[1:])
return m if m > list[0] else list[0]
def main():
list = eval(raw_input(" please enter a list of numbers: "))
print("the largest number is: ", Max(list))
main()
See more about python at brainly.com/question/18502436
#SPJ1
TRUE/FALSE. a company is in the middle of an operating system update to windows 10 from windows xp, windows 7, and windows 8.x. the diverse nature of the update has made it imperative that the help desk techs have the ability to run several concurrent vms. a few of the techs are experiencing frequent and extended periods of 100% cpu usage on their computers, and these spikes are limiting their ability to assist users in a timely manner.
True, as running many virtual computers at once may result in a lack of actual processing cores, which would restrict the ability to quickly assist people.
What are VMs or virtual machines?
To execute applications and run programs, a virtual machine (VM) uses software as opposed to a physical computer. On a physical "host" machine, one or more virtual "guest" machines are active.
It is furnished with a CPU, RAM, drives for file storage, and, if necessary, an internet connection.
Although the parts that make up your computer (referred to as hardware) are real, tangible, and only exist as code, virtual machines (VMs) are commonly referred to as software-defined or virtual computers inside of real servers.
A virtual machine is, to put it simply, an imitation of a real computer.
Teams can use virtual machines (VMs) that simulate many machines with various operating systems on a single computer.
To know more about virtual machines, visit: https://brainly.com/question/19743226
#SPJ4
explain the two basic approches that use the concept of pipeling at data link layer
The two basic approaches that use the concept of pipeline at data link layer is given below
Asynchronous pipelineSynchronous pipelineWhat is the data link layer?In the data link layer of the OSI model, the concept of pipelining can be used in two basic approaches:
Asynchronous pipeline: In this approach, a pipeline is used to transmit data in an asynchronous manner, meaning that the data is transmitted without a predetermined clock signal.
Synchronous pipeline: In this approach, a pipeline is used to transmit data in a synchronous manner, meaning that the data is transmitted using a predetermined clock signal.
Therefore, Both approaches can be used to improve the efficiency of data transmission by allowing multiple pieces of data to be transmitted at the same time. However, the synchronous pipeline approach may be more complex to implement and requires more accurate timing, as the clock signal must be carefully coordinated with the transmission of data.
Learn more about data link layer from
https://brainly.com/question/13439307
#SPJ1
which of the following is an attack that injects malicious scripts into web pages to redirect users to fake websites to gather personal information?
XSS is an attack that injects malicious scripts into web pages to redirect users to fake websites to gather personal information.
What is XSS?Malicious scripts are injected into websites that are otherwise safe and reputable in Cross-Site Scripting (XSS) attacks. XSS attacks take place when a web application is used by an attacker to send malicious code, typically in the form of a browser side script, to a different end user.
Wherever a web application incorporates user input into the output it produces without validating or encoding it, flaws that enable these attacks to succeed can be found.
An attacker may send a malicious script to an unwary user using XSS. The end user's browser will run the script regardless of whether it should be trusted because it has no way of knowing.
Learn more about XSS attacks
https://brainly.com/question/29490861
#SPJ4
After reviewing your pie chart, you realize that it could be improved by resizing the segments. Resizing the segments in proportion to each segment's relative value enables you to
TRUE OR FALSE
After reviewing your pie chart, you realize that it could be improved by resizing the segments. Resizing the segments in proportion to each segment's relative value enables you to visually show the different values is option A: TRUE.
What is the Resizing about?Resizing the segments of a pie chart in proportion to each segment's relative value can help to make the chart more accurate and easier to read, as it allows you to see the relative sizes of each segment more clearly.
This can be especially helpful if the values of the different segments are very different, as it can make it easier to compare the sizes of the segments.
Therefore, one can say that that It is generally a good idea to try to make the segments of a pie chart as proportional as possible, as this can help to make the chart more accurate and easier to understand.
Learn more about Resizing from
https://brainly.com/question/29402327
#SPJ1
See full question below
Q:
Once you finish creating data visualizations about the current state of the electric vehicle market, you turn to projections for the future. You want to communicate to stakeholders about the importance of longer vehicle battery range to consumers.
Your team’s data includes feedback from a consumer survey that investigated the importance of longer battery when choosing whether to purchase an electric car. The current average battery range is about 210 miles. By 2025, that range is expected to grow to 450 miles per charge.
You create the following pie chart:
After reviewing your pie chart, you realize that it could be improved by resizing the segments. Resizing the segments in proportion to each segment's relative value enables you to visually show the different values.
A
True
B
False
Answer:
TRUE
.T
.R
.U
.E
_________________
you are designing an application to support an automobile rental agency. which of the following probably should not be represented as an object?
If one of the following is the payment amount, an object shouldn't be used to represent it.
What kind of connection between the customer and the bank account is demonstrated?Customers who borrow money from a bank give the bank their own money. The banker is the creditor and the client is the debtor in any loan/advances account. The first time this has happened is when someone deposited money with the bank and then borrowed money from them.
What design method is used for CRC cards?CRC cards are an example of an object-oriented system design technique that uses index cards. On each card, the name of the class, its responsibilities, and its collaborators are listed (i.e. other classes that the class needs to fulfil its responsibility).
To know more about Application design visit:-
https://brainly.com/question/29849140
#SPJ4
What result set is returned from the following query?
Select Customer_Name, telephone
from customers
where city in ('Boston','New York','Denver');
The result set that is returned from the query is:
The Customer_Name and telephone of all customers living in either Boston, New York or Denver.
What is query?Data from a database is requested through a database query. The request needs to be expressed in a database table or set of tables using a language known as the query language. By doing so, the system is better able to comprehend and respond to the query.
A query is a request for information in traditional English. The same concept is referred to in computer programming, but data is retrieved from a database instead.
To make the database understand the query, though, a set of pre-defined code must be used when writing the query. This idea is also referred to as the query language.
Structured Query Language (SQL) is the industry standard for database management, but there are also other query languages like AQL, Datalog, and DMX that facilitate database communication.
Learn more about query
https://brainly.com/question/25694408
#SPJ4
When someone has the plaintext and the corresponding ciphertext which of the following will provide the crypto variable O Linear cryptanalysis attack O Chosen plaintext O Chosen ciphertext O Brute force
The following plaintext has been selected, and it will supply the crypto variable.
An intentional plaintext assault on a cipher system is what?A scenario known as a "chosen plaintext attack" allows the attacker to select plaintexts and examine the ciphertexts that go with them. Although this assault is thought to be less useful than the well-known plaintext attack, it is nevertheless quite harmful.
What kind of attack algorithm has been selected, and what plaintext and ciphertext is known?The chosen plaintext attack refers to a situation in which the attacker has the option to select plaintexts P I and read the ciphertexts C I that correspond to those plaintexts. Although this assault is thought to be less useful than the well-known plaintext attack, it is nevertheless quite harmful.
To know more about chosen plaintext attack visit:-
https://brainly.com/question/28521946
#SPJ4
which of the following may result from malware? group of answer choices spam may be sent from your computer. contents on your hard drive may be erased. secure information may be obtained from your computer. backdoors may be created.
Using a distance Trojan (RAT) is a type of malicious software that users frequently unknowingly install and that opens a backdoor for hackers to utilize later to remotely access the machine.
Malware could have what effects?Once malware is installed on your device, criminals can use it to steal your private data, send you unwanted or inappropriate advertisements, demand payment to decrypt data that has been encrypted by ransomware, and leave your device open to other infections.
What malware deletes or obliterates data from your computer?The cybercriminal has access to a variety of functions through the Trojan horse, including data theft, malware installation, file modification, file monitoring, data destruction, data theft of financial data, denial of service (DoS) assaults against certain web addresses, and more.
To know more about Trojan visit :-
https://brainly.com/question/9171237
#SPJ4
One of your customers wants to build a personal server that he can use in his home. One of his concerns is making sure he has at least one back up of their data stored on the server in the event of the disk failure. You have decided to back up his data using raid. Since the server is for personal use only, the customer wants to keep cost down. Therefore, he would like to keep the number of drives to a minimum. Which of the following grade systems would best meet the customer specifications?
Raid 1 is the grade systems would best meet the customer specifications.
Which Windows tool would you use to create and delete partitions on hard drives?One of the most seasoned Windows programs, diskpart manages a variety of disk management tasks, including allocating drive letters and erasing partitions.To offer fault tolerance and improved speed, set up a RAID 5 array. While a RAID 1 array solely offers fault tolerance, a RAID 0 array just improves speed. To establish a RAID 5 array, install three drives. Three disks are the bare minimum needed for a RAID 5 array.RAID (redundant array of independent disks) is a technique for protecting data in the event of a drive failure by storing the same data in several locations on numerous hard disks or solid-state drives (SSDs).Raid 1 is the grade systems would best meet the customer specifications.To learn more about Raid 1 refer to:
https://brainly.com/question/29834489
#SPJ4
The branch of computer science that studies computers in terms of their major functional units and how they work is known as computer organization. (T/F).
The branch of computer science that studies computers in terms of their major functional units and how they work is known as computer organization.is true.
What abbreviation is usually used to describe the computer's memory?The hardware in a computing device called RAM (Random Access Memory) stores the operating system (OS), application programs, and data that are currently in use so that the processor of the device may access them rapidly.When instructions are performed sequentially, they are acquired one at a time from memory and sent to the control unit where they are decoded and carried out. The component of a computer that stores and retrieves data and instructions is called memory. system element the primary housing for a computer's CPU, motherboard, memory, and other components. Motherboard. The computer's main circuit board, which is housed inside the system unit and to which all computer systems are connected components connect.To learn more about computer organization refer to:
https://brainly.com/question/14241634
#SPJ4
Galaxian SpaceBooks come in silver, gold, and copper, and diameters of 13’’, 14’’, and 16’’. The local Space Apple store has posted the follwoing sign:
if color == 'gold' or color == 'silver' and size == 13 or size == 16:
print('We have your model in stock')
The Galaxer would like to know what laptop configurations are currently available:
I don't get how the or and works in this problem
a. Which of the following three JavaScript code segments displays the phrase:
winter winter winter wonderland experience being displayed? Choose CODE SEGMENT 1. CODE SEGMENT 2 or CODE SEGMENT 3 and record your answer in the textbox provided b. b. BRIEFLY EXPLAIN YOUR REASONING - record your answer in the textbox provided CODE SEGMENTI: CODE SEGMENT 2:
The phrase "Monsters of Halloween are coming" is shown as JavaScript code fragments.
What purpose does JavaScript serve?JavaScript is a text-based programming language that can be used on both the client-side and the server-side to create interactive web pages. While HTML and CSS are the languages that give web pages structure and appearance, JavaScript adds interactive elements to internet pages that keep people interested.
JavaScript versus C++C++ is a programming language, whereas JavaScript is a scripting language. A JavaScript script is interpreted, but a C++ program must be compiled and run. C++ is statically typed, but JavaScript is dynamically typed.
To know more about JavaScript visit:-
https://brainly.com/question/16698901
#SPJ4
when creating an if-else-if statement you should always make your first condition the most specific. write a short paragraph responding to the questions below.
The if-else-if statement's most selective element or the case that will help determine the cases of the others is referred to as the most particular case first.
What is programming?Making a set of instructions that instruct a computer how to carry out a task is the process of programming. Computer programming languages like JavaScript, Python, and C++ can all be used for programming.
The term "most particular case first" refers to the case that will help determine the cases of the other cases in the if-else-if statement.
It is essential to start with the most specific case since the computer runs code from top to bottom, and if the most selective piece is somewhere other than the top, this would cause serious issues.
Thus, this can be concluded regarding the given scenario.
For more details regarding programming, visit:
https://brainly.com/question/11023419
#SPJ4
Any web- or mobile-based technology that is used for interactive communication between groups, communities, companies, and individuals can be referred to as ______.
static media
Web 1.0
social media
Web 1.1
Answer:
Explanation:
Collaborative technology.
what is computer vision syndrome
Answer:
it is a common virus in computer we shoula do reset
Python PleaseDefine a recursive function named insert, that expects an index, an item, and a Lisp-like list as arguments. The function returns a list in which the item is inserted at the given index position.Here is an example of its use:>>> lyst = buildRange(1, 5)>>> lyst(1 2 3 4 5)>>> insert(2, 66, lyst) # insert 66 at position 2(1 2 66 3 4 5)>>> lyst(1 2 3 4 5)
Answer:
Explanation:
def insert(index, item, lyst):
if index == 0:
return [item] + lyst
if len(lyst) == 1:
return lyst[:index] + [item] + lyst[index:]
else:
return lyst[:index] + [item] + insert(0, lyst[index])
(q005) ayelet is a research assistant in a lab at her university. her lab studies the way sensory information is processed, and their latest results suggest that different neural processes are associated with different types of information, such as recognizing faces, understanding grammatical phrases, and so on. the results support the global workspace model, which posits that
The answer is: there is no one area of the brain that is responsible for general "awareness" on its own.
What is awareness?Awareness is a complex process that utilize more that one area of the brain at the same time.
Awareness programs means by the community-wide or audience- specific to the programs, campaigns, or to the initiatives that increase audience knowledge and the share information and resources to prevent violence, promote safety, and reduce perpetration.
Currently, the scientists believe the general awareness in our brain is handled mostly through the combination of the process in thalamus area and the Hypothalamus Area.
To know more about awareness click-
https://brainly.com/question/24621985
#SPJ4
T/F a disk input/output (i/o) operation is a much slower process than accessing information stored in main memory, sometimes by as much as three or four orders of magnitude.
A disk input/output (i/o) operation is a much slower process than accessing information stored in main memory, sometimes by as much as three or four orders of magnitude. (True)
What is main memory?Internal physical memory of the computer is referred to as main memory. Main memory, in more precise terms, is the short-term memory of a computer. The main memory's function is to store information that the CPU frequently needs to access, such as instructions and data that is being processed right now. Data stored in secondary storage devices, such as hard drives, can be accessed much more quickly.
An instruction fetch unit reads instructions into the CPU, decodes them, and then the CPU executes them using one or more execution units. Only information that is present in the computer's main memory can be changed. Each program you run and each file you access must therefore be copied from a storage device into the main memory space.
Learn more about main memory
https://brainly.com/question/27193930
#SPJ4
T/F a weak entity has a primary key that is partially or totally derived from the parent entity in the relationship.
TRUE
A weak entity often has a primary key that only contains one foreign key. Because it incorporates the main key of the EMPLOYEE entity as a component of its own primary key, the entity DEPENDENT, for instance, is a weak entity.
Is there a connection between the owner and a weak entity type?An identifying link exists between a weak entity type and its owner. A covariant entity is a sort of entity on which a strong entity depends.
How is the weak entity's main key created?A weak entity set's primary key is created by adding its discriminator to the primary key of the strong entity set that is necessary for it to exist (see Mapping Constraints). For instance: the transaction
To know more about weak entity visit:-
https://brainly.com/question/27418276
#SPJ1
The Summary page for each quiz provides a list of Quiz Details, which includes the following information?
O how much time is allowed
O when the quiz is available
O the grade you earned on the quiz
O how many times you may take the quiz
O how many questions the quiz contains
The Summary page for each quiz typically provides a list of Quiz Details, which includes the following information:
How much time is allowed: This refers to the amount of time that a student has to complete the quiz. The time limit may be set by the instructor or may be unlimited.When the quiz is available: This refers to the dates and times that the quiz is open for students to take. The quiz may be available for a limited time period (e.g., during a specific week of the semester) or may be always available.The grade you earned on the quiz: This refers to the score or percentage of correct answers that the student received on the quiz. The grade may be calculated based on the number of correct answers, the difficulty of the questions, or some other criteria.How many times you may take the quiz: This refers to the number of times that a student is allowed to take the quiz. Some quizzes may be set up to allow students to take the quiz multiple times, while others may be set up to allow only a single attempt.How many questions the quiz contains: This refers to the total number of questions on the quiz. The number of questions may vary depending on the quiz and the subject matter being tested.What is Quiz?
In a quiz, you are being tested on your knowledge through the use of questions. At the conclusion of the presentation, we'll take a quiz. A challenge, exam, game show, or panel discussion. More synonyms for test
To know more about Quiz checkout https://brainly.com/question/24244569
#SPJ4
flow Chart finding Area & Perimeter of square.
The flow Chart finding Area & Perimeter of square is given below
What is the flow Chart finding Area & Perimeter of square?Here is a flow chart for finding the area and perimeter of a square:
StartInput the side length of the squareCalculate the area of the square by multiplying the side length by itselfCalculate the perimeter of the square by multiplying the side length by 4Output the area and perimeter of the squareEndHere is a visual representation of the flow chart:
Start
|
v
+-----------+
| |
| Input |
| side |
| length |
+-----------+
|
v
+-----------+
| |
| Calculate |
| area |
+-----------+
|
v
+-----------+
| |
| Calculate |
| perimeter |
+-----------+
|
v
+-----------+
| |
| Output |
| area |
| and |
| perimeter |
+-----------+
|
v
End
Learn more about flow Chart from
https://brainly.com/question/6532130
#SPJ1
A soccer coach scouting players has to enter the jersey number of players and print a list of those numbers when required. Identify the function that can help with this.
The push_back() function will help the soccer coach in the given situation.
What is a push_back() function?A vector can have components pushed into it from behind using the push_back() function.
The container size is increased by 1 and the new value is added at the end of the vector after the current final element.
A byte can be received from an input stream and subsequently returned (i.e., "pushed back") to the stream using pushback.
The PushbackInputStream class puts this concept into practice.
It offers a way to "peek" into an input stream without interfering with it.
So, in the given situation when needed, a soccer coach looking for players must enter each player's jersey number and print out a list of those numbers.
The function which can help the soccer coach is the push_back() function.
Therefore, the push_back() function will help the soccer coach in the given situation.
Know more about a push_back() function here:
https://brainly.com/question/16448316
#SPJ4
a type ii error occurs when: group of answer choices a bad lot is rejected a bad lot is accepted. a good lot is accepted a good lot is rejected.
When a subpar lot is accepted, a type II error happens. When testing hypotheses, the statistical phrase "type II error" is used to explain the error that results from failing to reject.
Why do type II errors occur?Low statistical power in a test is the primary source of type II error. If the statistical test is too weak, a Type II error will happen. A Type I mistake can also result from sample size because it will have an impact on the test's results.
What does type II econometric mistake mean?If a researcher rejects a null hypothesis that is actually true in the population, this is known as a type I error (false-positive); a type II error is when this happens (false-negative) occurs when a null hypothesis that is truly incorrect in the population is not rejected by the researcher.
To know more about Type II error visit:-
https://brainly.com/question/24320889
#SPj4
let k be the product of all factso b, a where a and b are integers satisfying 1
Approach: Let’s suppose b = n, by taking this assumption a can be found based on the given conditions:
(a % b = 0) => a should be multiple of b.
(a / b < n) => a / b = n – 1 which is < n.
(a * b > n) => a = n.
Below is the implementation of the above approach:
# Python3 implementation of the above approach
# Function to print the required numbers
def find(n):
# Suppose b = n and we want a % b = 0
# and also (a / b) < n so a = b * (n - 1)
b = n
a = b * (n - 1)
# Special case if n = 1
# we get a = 0 so (a * b) < n
if a * b > n and a // b < n:
print("a = {}, b = {}" . format(a, b))
# If no pair satisfies the conditions
else:
print(-1)
# Driver Code
if __name__ == "__main__":
n = 10
find(n)
Time Complexity: O(1), since there is no loop or recursion.
Auxiliary Space: O(1), since no extra space has been taken.
To know more about time complexity visit:-
brainly.com/question/28014440
#SPJ4
Assume that an array of integer values has been declared as follows and has been initialized.
int [] arr = new int[10];
Which of the following code segments correctly interchanges the value of arr[0] and arr[5]?
Question 10 options:
A)
int k = arr[5];
arr[0] = arr[5];
arr[5] = k;
B)
arr[0] = 5;
arr[5] = 0;
C)
int k = arr[0];
arr[0] = arr[5];
arr[5] = k;
D)
int k = arr[5];
arr[5] = arr[0];
arr[0] = arr[5];
E)
arr[0] = arr[5];
arr[5] = arr[0];
C) int k = arr[0]; arr[0] = arr[5]; arr[5] = k; code segments correctly interchanges the value of array arr[0] and arr[5]
What is array?
As opposed to defining distinct variables for each value, arrays are used to hold numerous values in a single variable. Set the data type (such as int) and the array name, followed by square brackets [], to construct an array.
To interchange the value of arr[0] and arr[5] in the array "arr", you can use the following code segment:
int k = arr[0];
arr[0] = arr[5];
arr[5] = k;
This code segment uses a temporary variable "k" to store the value of arr[0] before it is overwritten. It then assigns the value of arr[5] to arr[0] and the value of "k" (which is the original value of arr[0]) to arr[5]. This effectively swaps the values of arr[0] and arr[5].
Option (C) is the correct answer, as it correctly uses a temporary variable to store the original value of arr[0] before it is overwritten.
Option (A) is incorrect because it uses the wrong index for the temporary variable, resulting in the values of arr[0] and arr[5] being lost.
Option (B) is incorrect because it simply assigns new values to arr[0] and arr[5], rather than swapping their original values.
Option (D) is incorrect because it uses the wrong index for the temporary variable, resulting in the values of arr[0] and arr[5] being lost.
Option (E) is incorrect because it simply assigns the value of arr[5] to arr[0] and then overwrites it with the original value of arr[0], resulting in no change to the values of arr[0] and arr[5].
To know more about array checkout https://brainly.com/question/19570024
#SPJ4
which of the following usually provides dhcp services to dynamically assign ip addressing information to wireless clients and connect the wireless network to the internal wired network and the internet?
Controllers usually provide DHCP services to dynamically assign IP addressing information to wireless clients and connect the wireless network to the internal wired network and the internet.
What is a wired network?
We all know that anything physically composed of cables is considered to be "wired." The choices include fiber optic cables, copper wire, and twisted pair cables. Wires are used in a wired network to connect computers, laptops, and other devices to the Internet or another network. Due to the use of one cable per device and the direct and uninterrupted data it provides, a wired network is nearly always quicker than a wireless one.
Four basic categories of wired media are prevalent today:
Twisted-pair cable is a shielded, copper-based kind.Copper-based coaxial cable: Coaxial.Unshielded, copper-based, twisted-pair cable: this is Ethernet.Fiber optic cable is made of glass or plastic.To learn more about wired networks, use the link given
https://brainly.com/question/13103934
#SPJ4