Answer:
1 × 10⁻⁵ M
Explanation:
Step 1: Given data
Concentration of chlorine: 1 mg/LStep 2: Convert the concentration of chlorine from mg/L to g/L
We will use the conversion factor 1 g = 10³ mg.
1 mg/L × 1 g/10³ mg = 1 × 10⁻³ g/L
Step 3: Convert the concentration of chlorine from g/L to mol/L (molar)
We will use the molar mass of chlorine: 70.91 g/mol.
1 × 10⁻³ g/L × 1 mol/70.91 g = 1 × 10⁻⁵ mol/L = 1 × 10⁻⁵ M
explain in at least one full paragraph how your calculated molar mass of butane compares to the actual molar mass of butane, 58.12 g/mol. in your discussion, talk about sources of error in the experimental design.
Butane's experimental molar mass is 0.23 g/0.0040 moles, or 58 g/mole.13. The molecular formula for butane is C4H10.Calculate its molar mass.58.1 g/mole
How can you determine a molecule's true mass?We may determine the atomic weights of the elements using their periodic tables, and we discover the hydrogen has had an atomic mass of 1, while that of oxygen is 16.We sum the contributions out of each atom to determine the molecular weight with one water molecule, which is 2(1) + 1(16) = 18 grams/mole.
In what context is relative molar weights used?The ratio of a average mass with one molecule of the a compound or element to one-twelfth the mass of an atom or carbon-12 is known as the relative molecular mass.Ar has a mass number that is the same as its numerical value.
To know more about molecule visit:
https://brainly.com/question/19922822
#SPJ4
The percent composition of a given element in a compound is the number of _______ in one mole of that compound.
The percent composition of a given element in a compound is the number of molar mass in one mole of that compound.
What is meant the percent composition of a compound?The percentage of each element in a compound measured by mass is known as the composition. A compound's chemical formula can also be used to estimate its % makeup. To start, the formula's subscripts are employed to determine how much of each element there is in a mole of the compound.
How can you determine an element's percentage makeup in a compound?Percentage Composition. Find the molar mass in grams per mole of each component in the compound. Find the compound's total molecular weight. Divide the total molecular mass by the molar mass of the component. Your new number will range from 0 to 1. To obtain the percent composition, multiply it by 100%.
To know more about Percentage Composition, visit:
brainly.com/question/14876861
#SPJ1
Use the data given below to construct a Born-Haber cycle to determine the second ionization energy of Ca. Δ H°(kJ) Ca(s)→Ca(g) 193 Ca(g)→Ca (g) e− 590 2O(g)→O2(g) - 498 O(g) e−→O−(g) -141 O−(g) e−→O2−(g) 878 Ca(s) 12O2(g)→CaO(s) -635 Ca2 (g) O2−(g)→CaO(s) - 3414
A.1010 kJ
B.1508 kJ C.-1514 kJ D.-3027 kJ E.1757 kJ
The second ionization energy of Calcium is A)1010 kJ.So,correct option is A.
We have some data like
the enthalpy of formation of calcium oxide(CaO) as -635 kJ,the first ionization energy of calcium IE₁= 590 kJ,the first electron affinity energy of oxygen EA₁ = -141 kJ,the dissociation energy of oxygen DE = 249 kJ,the second electron affinity of oxygen EA₂ = 878 kJ,the lattice energy of calcium oxide(CaO) U = -3414 kJFor calculating the second ionization of calcium we need to write down the proper Born-Haber cycle equation which is
Δ[tex]H_f[/tex]= SE + IE₁ + IE₂ + DE + EA₁ + EA₂ + LE
=>-635KJ=590KJ+(-141KJ)+IE₂ + 249KJ+878KJ-(-3414KJ)
=>IE₂= - 590KJ + (-141)KJ - 249KJ - 878KJ + 3414KJ -635KJ
=>IE₂= -2352KJ + 3414KJ + 52KJ
=>IE₂=1010KJ
Hence, our required second ionization energy of Calcium is A)1010 kJ.
To know more about Born-Haber cycle, visit here:
brainly.com/question/6545392
#SPJ4
Select the part whose main job is to control which substances enter and leave an animal cell.
The cell membrane, which is a component of the cell, regulates which substances enter and leave an animal cell.
The cell membrane, a thin, pliable wall that encircles the cell and serves as a gatekeeper, allows some substances to flow through while blocking the passage of others. It is composed of a phospholipid bilayer, which includes proteins that serve as channels and pumps to control how chemicals enter and exit cells.
As it enables the cell to take in nutrients, excrete waste, and communicate with other cells, the cell membrane is crucial for preserving the integrity and function of the cell. Additionally, it offers structural support and aids in shielding the cell from harm.
To know more about Cell Membrane, visit:
brainly.com/question/1768729
#SPJ1
Name the following compound: CH3CH2CH3
The following compound: CH3CH2CH3 is propane and this a hydrocarbon and is alkane. Propane seems as a drab fueloline with a faint petroleum-like odor.
The vapors are heavier than air and a flame can flash returned to the supply of leak very easily. The leak can be both a liquid or vapor leak. The vapors can asphyxiate through the displacement of air. Under extended publicity to hearthplace or warmness the boxes might also additionally rupture violently and rocket.
CH3 CH2 CH3 is a compound referred to as a hydrocarbon, greater in particular an alkane. The not unusualplace call for this compound is propane, that is a form of fueloline extensively used as a gasoline supply. It is a hydrocarbon as it includes best hydrogen and carbon atoms.
Read more about compound;
https://brainly.com/question/26487468
#SPJ4
In solid NaCI, each sodium ion is surrounded by six chlorine ions and each chlorine ion is surrounded by six sodium ions. This arrangement results in a ?
The chlorine and sodium atoms in this configuration form a crystal lattice, a crystal structure made up of powerful ionic bonds.
What is a crystal lattice?The symmetrical, three-dimensional structural configuration of points representing atoms, ions, or molecules that make up a crystalline solid is known as the crystal lattice.
It can be characterized as the spatial geometrical arrangement of the atoms, ions, or molecules that make up the crystalline solid.
The cubic lattice of rock salt, NaCl, which has half of its lattice points occupied by sodium atoms and half by chlorine atoms, is one of the most prevalent structures.
Learn more about crystal lattice here:
https://brainly.com/question/28301570
#SPJ1
8. Rajat read the weather forecast of the coming week of July as shown here. Which of these items will
most probably be used by him in such weather?
Monday-Rainy
Tuesday-Rainy
Wednesday-Party cloudy
Thursday-Cloudy
Friday-Party cloudy
a. umbrella, raincoat and woolen socks
b. Raincoat, gumboots and woollen gloves
c. Raincoat, umbrella and gumboots
d. Umbrella, gumboots and sweater
b) Raincoats, gumboots, woollen gloves will most probably be used by Rajat in rainy and partly and cloudy weather.
The raincoat is easy to manage and mouldable on a cloudy day we can carry it in your bag easily, whereas the umbrella is hard to handle if you drive.
Gumboots help us in the cool climate they can be able to cover our feet from the water on roads. If you have woollen gloves, they will help you to guard your hands and makes you feel warm, which you need in cold and rainy weather. Carrying a pair of woollen gloves in cold weather is helpful.
To know more about weather
https://brainly.com/question/26741145
of the following functional groups, which one is known as the AMINO GROUP? O -NH2 O -COOH O -OH O -SH
The amino groups in the following functional groups are NH2 as the main amino groups.
This approach that an amino institution includes one nitrogen atom and hydrogen atoms bonded via covalent bonds. Amino organizations include nitrogen to hydrogen unmarried bonds. This purposeful institution is the principle thing of amino acids.
The molecular method of an amino institution is NH2. Amines are derived from ammonia (NH3).The substituent −NH 2 is referred to as an amino institution. Compounds with a nitrogen atom connected to a carbonyl institution, therefore having the shape R−CO−NR′R″, are referred to as amides and feature extraordinary chemical residences from amines.
Read more about Amino;
https://brainly.com/question/28362783
#SPJ4
If the following rate constant, Kf, and the reverse rate constant, Kr, for a chemical reaction are NOT equal, which must be true.
a: The reaction will be unable to acheive equilibrium
b: Kf and Kr will become equal as equilibrium is approached owing to concentration changes.
c: Kf and Kr will become equal as equilibrium is approached owing to temperature changes
d: Kf and Kr will remain unequal bot rates will become equal owing to concentration changes
e: Kf and Kr will remain unequal but the rates will become equal owing to temperature changes
d. Despite the fact that kf and kr will continue to be unequal, rates will become equal due to concentration changes.
At equilibrium, are Kf & Kr equivalent?When the forwards rate (kf[A]) equals equal reverse rate (kr[B]), the system has reached equilibrium and the concentrations of the reactant and product have stopped changing.
What in chemistry are KF and KR?Chemical kinetics governs all chemical reactions, whether they are reversible or not.So, by applying the idea of chemical kinetics, we may better grasp the equilibrium constant K.As illustrated below, let kr be the rate of the reverse reaction and kf be the rate of the forward reaction.
To know more about kf and kr visit:
https://brainly.com/question/30046975
#SPJ4
Determine the volume (in mL) of water that needs to be added to 50.0 mL of a 0.600 M LiBr to produce a 0.145 M solution. Assume the volumes are additive.
The components MaVa=MbVb is utilized in this
dilution problem. The preliminary 50.00 mL
answer desires to be diluted from 0.six hundred M to 0.145 M through the addition of 0.597 mL.
The components MaVa-MbVb is used
Ma = 0.6M
V_ = 50ml
Mb = 0.145M
Vb = (50 + Xml)
MaVa = MbVb
(0.six hundred)(50.00)=(0.one hundred forty five)(50.00+X)
30 - 0.one hundred forty five = (50 + x)
29.85/50 = X
X = 0.597 ml.
Dilution has no impact at the solute attention in an answer. The moles of the solute do now no longer alternate while a solvent is introduced to an answer, however the attention of the answer (in molarity and in all different units) and its quantity do. Taking an answer of better attention and step by step including water till the favored attention is acquired is an average approach for growing an answer of a particular attention. This method is called.
Read more about volume;
https://brainly.com/question/463363
#SPJ4
which of the following will change the pressure in a reaction involving only gases at equilibrium? select all that apply. multiple select question.
A reactant or product being added to or removed Variations in the container's volume Addition of an inert gas
How would you define "gasses" in this situation?Dangerous gas emissions are also coming from the planet's surface. Human activity has caused the atmosphere's quantities of carbon dioxide, methane, tropospheric ozone, and nitrous oxide to rise dramatically above pre-industrial levels.
In the singular, what does the word "gas" mean?The plural version of the word "gas" is "gase," and it refers to a substance that expands to fill any container. Many distinct meanings can be assigned to third-person present tense verbs, such as "gasses."
To know more about Gases visit:
brainly.com/question/1369730
#SPJ4
SO2(g)+Cl2(g)⇌SO2Cl2(g)
K=6.9×10−6 at 1000 K
If a reaction mixture initially contains 0.760 bar each of SO2 and Cl2, what is the partial pressure of SO2Cl2 at equilibrium?
Answer:
At equilibrium, the partial pressure of a gas is equal to the product of its equilibrium constant and the partial pressure of the other gases it reacts with. In this case, the equilibrium constant is given as K=6.9×10−6 at 1000 K, and the partial pressure of SO2 and Cl2 are both 0.760 bar. Therefore, the partial pressure of SO2Cl2 at equilibrium is:
6.9×10−6 * 0.760 bar * 0.760 bar = 4.3×10−8 bar
So the partial pressure of SO2Cl2 at equilibrium is 4.3×10−8 bar.
There are so many types of chemical reaction reaction like combination reaction, double displacement reaction. To solve such this we must know the concept of equilibrium reaction. Therefore, the partial pressure of SO[tex]_2[/tex]Cl[tex]_2[/tex] at equilibrium is 4.3×10⁻⁸bar.
What is chemical reaction?Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved.
The balanced equation can be written as
SO[tex]_2[/tex](g)+Cl[tex]_2[/tex](g)⇌SO[tex]_2[/tex]Cl[tex]_2[/tex](g)
K=partial pressure of SO[tex]_2[/tex]Cl[tex]_2[/tex] ÷(partial pressure of SO[tex]_2[/tex] × partial pressure of Cl[tex]_2[/tex] )
Substituting all the given values, in the above equation, we get
6.9×10⁻⁶ = (0.760 bar × 0.760 bar)÷partial pressure of SO[tex]_2[/tex]Cl[tex]_2[/tex]
= 4.3×10⁻⁸bar
Therefore, the partial pressure of SO[tex]_2[/tex]Cl[tex]_2[/tex] at equilibrium is 4.3×10⁻⁸bar.
Learn more about the chemical reactions, here:
https://brainly.com/question/3461108
#SPJ2
Start at a graded potential then explain as it turns into an action potential and ends in release of a neurotransmitter. include chemically gated channels, voltage gated channels, sodium gates, potassium gates, and sodium potassium pump, nodes, myelin, and saltatory conduction in your answer.
All of the gated potassium and sodium channels are shut off during the resting state (the period preceding an action potential).
What impacts the body does salt have?A little amount of sodium is needed by the human body to convey nerve impulses, contract & relax muscles, and keep the right ratio of water and minerals. We are thought to require 500 mg of sodium everyday for these essential processes.
What does food sodium mean?
Many foods include the mineral sodium. Your body needs salt to maintain healthy neuron and muscle function. The balance of body fluids is also maintained. Sodium chloride is used to make the majority of table salts. Therefore, salt used to season or prepare food typically contains sodium.
To know more about sodium visit:
https://brainly.com/question/29327783
#SPJ4
Researchers investigated the influence of environmental pH on the activity of peroxidase, an enzyme that catalyzes the conversion of hydrogen peroxide to water and oxygen gas. In an experiment, the researchers added a hydrogen peroxide solution containing guaiacol to several identical test tubes and adjusted the solution in each test tube to a different pH . The researchers included the guaiacol because it caused the solutions to change color as the reactions proceeded, which the researchers relied on for measuring reaction rates. Finally, the researchers added the same amount of peroxidase to each test tube and measured the rate of each reaction at 23°C . The results of the experiment are represented in Figure 1.
Based on Figure 1, which of the following statements best predicts the effect that a change from a moderately acidic environment ( pH near 6) to a basic environment will have on peroxidase activity?
O Peroxidase activity will decrease.
O Peroxidase activity will increase.
O Peroxidase activity will stay the same.
O Peroxidase activity will increase at first and then decrease.
Based on Figure 1, the following statement best predicts the effect that a change from a moderately acidic environment ( pH near 6) to a basic environment will have on peroxidase activity:
Peroxidase activity will decrease.
What is Peroxidase activity?Peroxidases are the most common enzyme and are thought to exist in every living genus. They produce reactive oxygen species and catalyse peroxide reduction. In the current study, we showed that insect infestation causes peroxidase activity in sap and total soluble protein of plant leaves.
For this study, three significant crop plants—cotton, cowpea, and the tomato—were used. Peroxidase activity in the sap and TSP of all the studied plants increased by 1.6 to 3.14 times after chewing insect infestation.
Similar findings were made when sap-sucking insects were fed, increasing the peroxidase activity of the sap and TSP by 1.8 to 2.53 fold. In-gel peroxidase assay confirmed the increased peroxidase activity.
Learn more about Peroxidase activity
https://brainly.com/question/29358421
#SPJ4
7. Are the following chemical equations balanced or unbalanced? Balance
any unbalanced equations.
a. 2KClO3 → KCl +30₂
b. Fe+O₂ → FeO
c. 2Li+ Cl₂ → 2LiCl
d. NH3 + HCl → NH4Cl
Answer:
a. 2KClO3 → 2KCl + 3O2
Explanation:
In each reaction box, select the best reagent and conditions from each list. 1. reagent 1 2. reagent 2 3. reagent 3 Br
AlCl3-CH3Cl is the right response, 1) 2) HNO3 and H2SO4 at ambient temperature 3) HNO3-H2SO4 fuming at temperatures of 90–100 0 C. I believe that benzene is being converted in this process to 2,4,6-trinitrotoluene.
Give an example of reagent.A reagent is a chemical or combination that is used to determine if another material is present or absent, typically by observing a change in color, or to calculate the concentration of a substance.
A chemical reaction's reagent is what?In the field of chemical chemistry, a reagent is defined as "a material or compound given to a system in order to bring about a chemical reaction or is added to verify whether a reaction has happened or not." The presence of another chemical can be detected and confirmed using a response like this.
To know more about Reagent visit:
https://brainly.in/question/8169624
#SPJ4
Suppose that a certain fortunate person has a net worth of $77.0 billion ($ 7.70×1010 ). If her stock has a good year and gains $3.20 billion ( 3.20×109 ) in value, what is her new net worth?
Express your answer to three digits.
The new net worth of the person is equal to 80.2 × 10⁹.
What are significant digits?Significant figures can be used to generate numbers that will be written in the form of digits. We can also evaluate the number of significant digits by counting the numbers from the 1st non-zero digit placed on the left.
In the case of addition or subtraction, the number of significant figures will be the same as the value with the fewest significant digits.
Given, the net worth of the person, A = 77 billion = $ 77 × 10⁹
The person's stock gains in the following year, I = $ 3.20 billion
I = $ 3.20 × 10⁹
The new net worth of the person, A(new) = A + I
A (new) = 77 × 10⁹ + 3.20 × 10⁹
A (new) = $ 80.2 × 10⁹
Learn more about significant digits, here:
brainly.com/question/28641790
#SPJ1
An object moving with a speed of 24 m/s has a kinetic energy of 356 J, what is the mass of the object.
Taking into account the definition of kinetic energy, the object moving with a speed of 24 m/s and a kinetic energy of 356 J has a mass of 1.236 kg.
Definition of kinetic energyKinetic energy is defined as the energy associated with bodies that are in motion.
Kinetic energy is defined as the amount of work necessary to accelerate a body of a certain mass and in a position of rest, until it reaches a certain speed.
Kinetic energy is represented by the following expression:
Ec = 1/2×m×v²
Where:
Ec is kinetic energy, which is measured in Joules (J).m is mass measured in kilograms (kg).v is velocity measured in meters over seconds (m/s).Mass of the objetc in this caseIn this case, you know:
Ec= 356 Jm= ?v= 24 m/sReplacing in the definition of kinetic energy:
356 J = 1/2× m× (24 m/s)²
Solving:
356 J÷ [1/2× (24 m/s)²]= m
1.236 kg= m
Finally, the mass of the object is 1.236 kg.
Learn more about kinetic energy:
brainly.com/question/13925799
#SPJ1
2020 national emission standards for hazardous air pollutants: miscellaneous organic chemical manufacturing residual risk and technology review
The U.S. Environmental Protection Agency (EPA) is proposing national emission standards for hazardous air pollutants (NESHAP) for the miscellaneous organic chemical manufacturing (MOCM) source category.
What are Air pollutants?
Air pollutants are substances in the air that can have negative impacts on the environment, human health, and the planet. Common air pollutants include ozone, particulate matter, carbon monoxide, sulfur dioxide, nitrogen dioxide, and lead.
The proposed standards would include national emission limits for hazardous air pollutants (HAP) and work practice standards to reduce emissions of HAP from existing and new MOCM sources. The proposed standards would also require risk and technology reviews to ensure that residual risk to human health and the environment is minimized and that the most stringent emission limits and work practice standards are implemented. The technology review would include a review of available control technologies, as well as a review of the remaining health and environmental risks after controls are implemented. The risk review would consider the overall risk to public health and the environment from the MOCM source category, including both source-specific and cumulative risk. The proposed standards would also require compliance demonstrations, periodic monitoring, recordkeeping, and reporting.
To know more about Air pollutants,
https://brainly.com/question/24704410
#SPJ4
The answer to my English work
Answer: The use of inclusive language is an important way to reflect the diverse nature of a given society. Non-discriminatory language avoids false assumptions about people and helps to promote respectful relationships. A commitment to inclusive language is an important attribute of a modern, diverse and inclusive society.
Explanation:
how boyle's temperature is related to Vander waal's constants a and b?
The ratio of Boyle's temperature and critical temperature is 278. both a and b are present in Boyle's temperature.
What is boyles temperature ?Boyle temperature can be defined as the point in the temperature range in which a real gas starts to behave like an ideal gas at a pressure range.
The temperature at which the second coefficient in the expression becomes zero is also known as a Boyle temperature.
In Boyle's Temperature , TB=aRb.
Critical Temperature , TC=8a27Rb.
a and b are van der Waal's constants. R is molar gas constant. The Ratio of both temperatures
= TB/TC = aRb/8a27Rb
Both the critical temperature and boyles temperature have the Vander Waal's constant 'a' and 'b'.
learn more about boyles temperature from
https://brainly.com/question/26040104
#SPJ1
Which student’s observations would prove more useful to a chemist?
Answer:
Because a statistic is based on data gathered through random sampling, which is a random experiment, it is a random variable. Therefore, Luisa's observations would prove more useful to a chemist.
Explanation:
Consider a gradient elution run of non-polar compounds in reverse
phase HPLC with a methanol-water gradient. Does the mobile phase
start as pure water and then end up as pure methanol or is it done the
other way? Explain your reasoning fully.
The order of elution in reversed-phase HPLC is different from that in a normal-phase separation, with more polar solutes eluting first. The mobile phase's polarity is increased to produce longer retention periods.
What is HPLC ?A method in analytical chemistry called high-performance liquid chromatography, formerly known as high-pressure liquid chromatography, is used to separate, recognize, and quantify each component in a mixture.
To obtain a consistent increase in the organic solvent (usually methanol or acetonitrile) over the course of the study, gradients in reversed-phase HPLC typically use on-line (dynamic) mixing of solvents. This increases the elution strength of the eluent over time.
Thus, In contrast to the normal phase HPLC, which employs a polar stationary phase and a less polar mobile phase, the reverse phase HPLC makes use of a nonpolar stationary phase and a polar mobile phase.
To learn more about HPLC, follow the link;
https://brainly.com/question/2292345
#SPJ1
Which of the following upon reacting with oxygen would form the greatest amount of carbon dioxide? a) n-pentane b) isopentane c) neopentane d) two of the above would form equal amounts e) all (a-c) of the above would form equal amounts
Upon reacting with oxygen would form the greatest amount of carbon dioxide e) all (a-c) of the above would form equal amounts.
Isomer are compound which are same molecular formula but different structural formula. The isomers of pentane are n-pentane, isopentane and neopentane, they have same molecular formula but the arrangement of atoms is different. Pentane is an organic compound with the formula C5H12—that is, an alkane with five carbon atoms.
Thus, Upon reacting with oxygen would form the greatest amount of carbon dioxide will be the same in all isomers.
Thus, the correct option is e.
To learn more about isomers check the link below:
https://brainly.com/question/26298707
#SPJ4
Infants born with severe respiratory problems are sometimes given liquid ventilation. They breathe a liquid that can dissolve more oxygen than air can hold. One of these liquids is a flourinated compound, CF3(CF2)7Br. The solubility of oxygen in this liquid is 66mL O2 per 100mL of liquid. In contrast, air is 21% oxygen by volume. Calculate the moles of O2 present in an infant's lungs (volume:17mL) if the infant takes a full breath of air. Assume a pressure of 101.3kPa in the lungs.
The moles of [tex]O_{2}[/tex] present in an infant's lungs, if the infant takes a full breath of air is [tex]1.46*10^{-4}[/tex] moles
We can calculate the moles in the following way
We have been given the following data,
The infant takes a full breath of air
Full breath of air= volume of lungs of the infant= 17 mL= [tex]\frac{17}{1000}[/tex] L
Pressure inside lungs(P)= 101.3* [tex]10^{3}[/tex] Pa= 1 atm
Temperature(T)= Room temperature= 298 K
Volume of Oxygen(V)= 21% of total volume of lungs= 21% of 17 mL
= [tex]\frac{21*17}{100}[/tex] mL
= 3.57 mL
= [tex]\frac{3.57}{1000}[/tex] L
Now, let the number of moles of oxygen the infant breathes be n.
Since PV=nRT
Therefore, n= [tex]\frac{PV}{RT}[/tex]
We know that the value of R is 0.082 L atm/K mol
n = [tex]\frac{(1* 3.57)}{(0.082*298*1000)}[/tex] moles of oxygen
= [tex]1.46*10^{-4}[/tex] moles of oxygen
Read similar questions about the Mole concept from:
https://brainly.com/question/20674302
#SPJ4
Sort the following transitions from an excited state to a ground state according to the series into which they fall. Drag the appropriate transitions to their respective bins of lyman series, balmer series, or paschen series. The following transition are n=5 to n=2, n=7 to n=2, n=5 to n=1, n=7 to n=1, n=3 to n=2, n=4 to n=3
The following transition are n=5 to n=2 is balmer series, n=7 to n=2 is balmer series, n=5 to n=1 is lyman series, n=7 to n=1 is lyman series, n=3 to n=2 is balmer series, n=4 to n=3 is paschen series.
Energy level diagrams show us the various series of lines found in the hydrogen atom's spectrum. The diagram's horizontal lines represent various energy levels. An electron moves from a higher energy level to a lower energy level as shown by the vertical lines.
It is crucial that each transition correspond to a specific characteristic wavelength, as shown in the diagram. As a result, various transitions result in various line series. Among the different series acquired are the Lyman, Balmer, Paschen, Brackett, Pfund, and Henry series, to name a few.
to know more about wavelength visit
https://brainly.com/question/4112024
#SPJ4
In which of the following ways are the processes that occur in electrolytic cells the opposite of those occuring in galvanic cells? Select all that apply. O In electrolytic cells, chemical energy is produced from electrical energy. In galvanic cells, the converse is true. O Electrolytic cells contain nonspontaneous reactions, while the reactions in galvanic cells are spontaneous. O In electrolytic cells, reduction occurs at the anode rather than at the cathode (as it does in galvanic cells). O In electrolytic cells, the cathode is negatively charged, while the anode is positively charged (the reverse is true for galvanic cells)
The electrolytic cells, chemical energy is produced from electrical energy. In galvanic cells, the converse is true for the processes that occur in electrolytic cells the opposite of those occuring in galvanic cells.
There are sorts of electrochemical cells: galvanic, additionally referred to as Voltaic, and electrolytic. Galvanic cells derives its electricity from spontaneous redox reactions, whilst electrolytic cells contain non-spontaneous reactions and as a result require an outside electron supply like a DC battery or an AC energy supply.
Here, the redox response is spontaneous and is liable for the manufacturing of electrical electricity. The redox response isn't spontaneous and electric electricity needs to be furnished to provoke the response.
Read more about energy;
https://brainly.com/question/1634438
#SPJ4
One of the factors that influences the rate of any chemical reaction is the collision rate of the reactants. a. Identify the variables that influence the rate at which reactants collide. b. Explain how each of these variables can increase the rate of a chemical reaction.
According to the collision theory, temperature, strain of gaseous reactants, and the attention of the reactants have an effect on the range of collisions and the range of powerful collision over the time.
These elements are the character of the reactants, attention, floor area, temperature and catalysts. Each of those elements will increase response charge due to the fact they boom the range or strength of collisions.There are 5 widespread residences that could have an effect on the charge of a response:The attention of the reactants.
The greater focused the quicker the charge. Temperature. Physical kingdom of reactants. The presence (and attention/bodily form) of a catalyst (or inhibitor).
Read more about chemical;
https://brainly.com/question/26487468
#SPJ4
Use coefficients to increase the atoms on each side.
Check to make sure you have the same number of each type of atom on each side. Count the atoms on each side.
Identify the atoms on each side.
opit
1
2
3
4
By counting the atoms on each side, the right order for solving the equation will be 3, 4, 2, and 1. Decide which atoms are on each side, make sure there are an equal number of each sort of atom on each side, and then utilize coefficients to add more atoms to each side.
What does "balanced chemical reaction" mean?The number of atoms involved in the reactants and products sides of the chemical equation must match for the equation to be considered balanced.
In this particular chemical process, for instance, nitrogen (N2) and hydrogen (H) combine to create ammonia (NH3). Nitrogen and hydrogen are the reactants, and ammonia is the end result.
Chemical reactions must be in balance in order to adhere to the law of conservation of mass, which stipulates that mass cannot be created or destroyed.
the proper method for calculating the number of atoms on either side of the equation. Make a list of the atoms on each side.
Check to make sure that each side has the same number of each sort of atom, and then use coefficients to add more atoms to each side.
As a result, 3, 4, 2, and 1 are the proper order.
To know more about Count the atoms visit:-
https://brainly.com/question/11920938
#SPJ4
It is observed that the reaction producing KCl from its elements goes essentially to completion. Which of the following is a true statement about the thermodynamic favorability of the reaction?
If the reaction producing KCl from its elements goes essentially to completion, it is likely that the reaction is thermodynamically favorable. This means that the reaction will proceed spontaneously and release energy as it occurs.
Thermodynamic favorability is determined by the change in the enthalpy (heat) and the change in the entropy (disorder) of the system. If the change in enthalpy is negative (exothermic) and the change in entropy is positive (increase in disorder), the reaction is likely to be thermodynamically favorable.
In general, reactions that are thermodynamically favorable are more likely to occur spontaneously and go to completion, while reactions that are thermodynamically unfavorable are less likely to occur spontaneously and may not go to completion. However, other factors, such as the presence of catalysts or the rate at which the reaction occurs, can also affect the likelihood of a reaction occurring.
If the reaction producing KCl from its elements goes essentially to completion, it is likely that the reaction is thermodynamically favorable. This means that the reaction will proceed spontaneously and release energy as it occurs.
Thermodynamic favorability is determined by the change in the enthalpy (heat) and the change in the entropy (disorder) of the system. If the change in enthalpy is negative (exothermic) and the change in entropy is positive (increase in disorder), the reaction is likely to be thermodynamically favorable.
In general, reactions that are thermodynamically favorable are more likely to occur spontaneously and go to completion, while reactions that are thermodynamically unfavorable are less likely to occur spontaneously and may not go to completion. However, other factors, such as the presence of catalysts or the rate at which the reaction occurs, can also affect the likelihood of a reaction occurring.